Final assembling

Last steps before you are done

Estimated building time: 0,5 hours.

Section in progress...

Closing the 19” case

In all probability, the Parker screws are that sharp that they cut away the paint and ensure enough contact for grounding and shielding (at least for audio purposes). After closing the 19" it's recommendable to perform a ground connection check with an ordinary multimeter between the ground pin of the power connector and top/bottom plate.

If unsure connect a grounding strip between the housing and top/bottom plate:

Well done

You have finished this section, so click here to navigate back to the assembly & adjustment instructions.


The contents of this document are provided as-is. The published information could contain technical inaccuracies, typographical errors and out-of-date information. This document may be updated or changed without notice at any time. Use of the information is therefore at your own risk without any liability for special, indirect, incidental or consequential damages resulting from or related to the use of this document.